Gentec-EO launches the HP60A-15KW-GD-QBH power detector series for measurement of fiber lasers with power up to 15kW.

This new laser power detector is ideal for those in need to measure average laser power for burn-in tests, during long periods of time or even quickly in the field with the simplicity of connecting a fiber laser output directly to the detector.

Watch this presentation video to discover the HP60A-15KW-GD-QBH.

The HP60A-15KW-QBH series is calibrated to NIST standards and has damage thresholds up to 80 kW/cm2. With the technology uses in this product series, Gentec-EO has the capability to design custom products that measure much higher laser power levels than 15 kW if needed.

EASY AND CONVENIENT TO USE

The user simply needs to connect its QB or QBH fiber output and adapted water lines and is ready to measure. There are 2 outputs on this product: DB15 and USB. The DB15 cable allows to view the measurements on your Gentec-EO display device, such as a MIRO ALTITUDE. Using the USB connection with a PC, the user can view and acquire data, or integrate the signal in a control feedback loop.

This detector series is less sensitive to variations in water cooling temperature than any other high power water-cooled meter on the market, which provides a stable reading.

A wireless connection option is also available with these detectors, so the high power room can be closed and to use less cables for safer measurements. Check out Gentec-EO’s BLU award-winning technology if you are interested in this.

Gentec-EO provides serial commands and application support for seamless integration with the customer’s laser application.

The HP60A-15KW-GD-QBH generates zero back reflection to your environment and negligible back reflections to the fiber output connected to the detector thanks to the gold cone absorber design inside of it.

HIGH POWER HANDLING

Handles up to 15 kW of continuous power with our standard models. Custom models available for higher powers (See SUPER HP).

STABLE READING

Less sensitive to variations in water cooling temperature than any other high power water-cooled meter on the market

LARGE APERTURE

Our standard HP models (4KW, 12KW and 15KW) have a very large effective aperture up to 125 mm Ø to accomodate even the largest laser beams. Larger apertures with various shapes are available upon request (See SUPER HP).

AVAILABLE WITH YAG AND CO2 CALIBRATION

All HP Models can be calibrated at YAG and CO2 wavelengths with a calibration uncertainty of +/- 5%

DIRECT USB CONNECTION TO A PC

Each head comes with both a DB-15 connector (for use with a Gentec-EO monitor) and a USB2.0 output for direct connection to a PC.

AWARD-WINNING TECHNOLOGY

The HP-BLU series wireless detectors for high-power lasers was recognized among the best by an esteemed and experienced panel of judges from the optics and photonics community at the 2020 Laser Focus World Innovators Awards