Ekspla's FemtoLux 30 is a reliable and versatile femtosecond laser designed from the get-go for maximum reliability, seamless integration and non-stop 24/7/365 zero maintenance operation with innovative ”dry” cooling.
The FemtoLux 30 femtosecond laser has a tunable pulse duration from <350 fs to 1 ps and can operate in a broad AOM controlled range of pulse repetition rates from a single shot to 4 MHz.
The maximum pulse energy is more than 90 μJ operating with single pulses and can reach more than 250 µJ in burst mode, ensuring higher ablation rates and processing throughput for different materials.
The FemtoLux 30 beam parameters will meet the requirements of the most demanding materials and micro-machining applications.
Innovative laser control electronics ensure simple control of the FemtoLux 30 laser by external controllers that could run on different platforms, be it Windows, Linux or others using REST API commands.
This makes easy integration and reduces the time and human resources required to integrate this laser into any laser micromachining equipment.
Download pdf Catalogue below
- 30 W at 1030 nm, 11 W at 515 nm, 6 W at 343 nm
- >90 µJ at 1030 nm, >55 µJ at 515 nm, >30 µJ at 343 nm
- MHz, GHz, MHz+GHz burst modes
- < 350 fs – 1 ps
- Single shot to 4 MHz (AOM controlled)
- Dry cooling (no water used)
SEAMLESS USER EXPERIENCE
- Easy integration: Remote control using REST API commands via RS232 and LAN
- Reduced integration time: Demo electronics is available for laser control programming in advance
- Easy and quick installation: No water, fully disconnected laser head. Can be installed by the end-user.
- Easy troubleshooting: Integrated detectors and constant system status logging.
- No periodic maintenance required.
FEATURES
- Typical max output power
30 W at 1030 nm,
11 W at 515 nm,
6 W at 343 nm - >90 µJ at 1030 nm,
>55 µJ at 515 nm,
>30 µJ at 343 nm - High energy version available (1 mJ at 10 kHz)
- MHz, GHz, MHz+GHz burst modes
- >250 µJ in a burst mode
- <350 fs – 1 ps
- Single shot to 4 MHz (AOM controlled)
- Pulse-on-demand (PoD), with jitter as low as 20 ns (peak-to-peak)
- <0.5% RMS power long term stability over 100 hours
- M² < 1.2
- Beam circularity > 0.85
- Zero maintenance
- Dry cooling (no water used)
- PSU and cooling unit integrated into single 4U rack housing
- Easy and quick installation
- Compatible with galvo and Polygon scanners as well as PSO controllers
- 2 years of total warranty
APPLICATIONS
- Glass, sapphire and ceramics micro processing
- Microelectronics manufacturing
- Glass intra volume structuring
- Micro processing of different polymers and metals
- LCD, LED, OLED drilling, cutting and repair